3/ Using Micro Color Compac
Follow this procedure to load the Micro Color Compac program into the MC-10:
Insert the Micro Color Compac tape (supplied with this package) into the cassette recorder. The tape should be completely rewound.
When the OK prompt is displayed on the TV Screen, type:
- Press PLAY on the recorder until it is locked in position.
The MC-10 will search for and load the program. While it is "searching" for the program, the letter S will appear in the upper-left corner of the TV Screen.
When the program has been found, the letter F and the filename will appear at the top of the Screen.
If you did not specify the filename, the first program encountered was loaded into the Computer.
- When the program has been loaded, the message OK will reappear on the Screen.
- Press STOP on the recorder to stop the tape and unplug the cassette recorder from
- Then to run the program, type:
When the program has been "executed," the Screen will display:
MICRO COLOR COMPAC VER 01.00.00
B: 6AUD RATE: 300
D: DUPLEX: FULL
W: WORD LENGTH: 8 BIT
L: AUTO LINE FEED: OFF
U: UPPER CASE ONLY
CHANGE ITEM OR BREAK FROM MENU:
COPYRIGHT 1983 TANDY CORP.
ALL RIGHTS RESERVED